Quantcast
Channel: Chris Nevard Model Railways & Photography Blog
Viewing all 825 articles
Browse latest View live

A Foreign Layout!

$
0
0
Regular followers of this blog know that I tend to concentrate on backwaters - frequently in the west of England. As a nice change a couple of weeks ago I picked up a part complete project, the owner wanting me to add scenery and ground texture to his German layout. 20 hours work has produced the below.... shortly before we loaded up the car for its return journey we snapped a few photos 'under the lights'.

 It's based on a southern German pre-ware scenario in an area known for its sandy limestone soil. It was important too keep the colouring light.
 Arriving at the end of the line..
 Coaling up...
 A wide open feeling has been achieved within a relatively small foot print. Sometimes it's good not to cram too much in..
You can find out more about this layout here http://timhalesblog.blogspot.co.uk/
Drop me a line if you have a stalled project or simply don't have time to complete a project.

Layout in a Box!

$
0
0
Brakevan rides today!
Happy New Year!

Apologies for the lack of posts here, I've been rather busy with photographic shoots for Model Rail magazine and more recently a few commercial model making commissions. Drop me a line

Enough of that, back in the autumn I was approached to build a layout in a box. I must admit to not really looking at plastic storage boxes to house a layout until then, but the owner needed to be able to store the layout under a bed or on-end in a cupboard when not in use.

Everything had  to be completely self contained in a foot print of 80 x 30cm - and being a fan and serial builder or micro layouts, I enjoy the challenge to see what can be squeezed in, whilst still creating a believable scenario so this was right up me street.

The scenario to be depicted was that of the early days on the Bluebell Railway, featuring a truncated railway halt for brake van rides - Freshfield Halt being some of the inspiration with the line running through a shallow cutting.
The layout is fully scenic, this end can be used as a fiddle yard.
Nice an tidy - just 80 x 30cm! There's scope for projects like this to be extended
In blatant commercial plug mode, I'm taking further modelling commissions for the spring/summer - drop me a line via the link at the top of this page or click here

Scotland

$
0
0
In December I was as a commercial job invited up to the Scottish Borders to give a Hazelbank a scenic up and under. The layout depicting a could have been scenerio on the Waverley Route is 21 x 15 feet - so 3 whole days were spend messing about with static grass and around 60 assorted trees.

Fresh static grass was applied over the existing tired scenery, selecting suitable colours to depict a late summer/early autumn feel.

This is a new view on Hazelbank, new trees add a whole new feel to the place - the model being a Scottish Borderland scenero.

In addition to trees and static grass, the the mountain river 'Gala Water' has been given a refresh too.

If you want to know more about Hazelbank (pre-refurbishment) follow this link www.sdeg.co.uk/layout-information

Drop me a line if you have a layout that needs a bit of TLC

LNWR Webb Coal Tank

$
0
0
 A little bit of loco tweaking this afternoon. A Bachmann LNWR Webb Coal Tank renumbered and weathered (washes and dry brush, sealed under a top coat of Tamiya Matt). It was originally in LMS livery. The smokebox dart needs to be swapped out for a later type, as and when I find something.
A crew still needs to be added along with some real coal

This useful little loco looks very at home on Brew Street. It's a very good runner too, ideal for a shunting layout this one.

March 2018 Update

$
0
0
March 2018 update...

Since moving in to model making commissions the diary has been filling up nicely, keeping me nice an busy when not out on the road for Model Rail magazine. My photography often involves a lot of driving, so as a balance it's great to work in my studio at home - especially with the recent snowy conditions. Here is a quick precise of what's been going on....
An N gauge 'nano layout' - just awaits a photo backscene. Click to enlarge
Another layout in a box! My current project as seen above, has been to complete a tiny N gauge depiction of the Kyle of Lochalsh for a customer - all designed to fit in to one of those plastic storage crates. The photo above shows it awaiting a proper backscene which is currently at the printers. Excuse the ropey mobile phone snap above - I'll do a proper shoot of it before handing it over. 

The owner, being deeply smitten with Pete Matcham's stunning 2mm fine scale layout, asked me to build something similar - but with my own slant - it would be wrong to build an exact clone. The baseboards were supplied with the track already laid, my job being to decorate it with buildings and scenery - the station building being a complete scratchbuild.
Kyle of Lochalsh in February - what a lovely backscene! Click to enlarge
Working in N gauge really sharpens up ones model making because you get in a lot closer with a camera - highlighting any rough bits! I'll come back to this project shortly with some proper photographs once the backscene (currently at the local printers) is in place.

Gateshead Fuel Shed. Click to enlarge
Also on the work bench is a 4mm scale model of Gateshead fueling shed, a stalled project originating from a rather rough laser cut kit. It is  currently in the hands of miniature metalwork expert Graham Bone having some intricate brass work added to the roof - before coming back to me for completion. Here is is halfway through the build.

Adams Radial tank - in early Bluebell Railway guise. Click to enlarge
A fun little job over the Christmas break was to depict the Bluebell Railway's Adams Radial tank as it arrived shortly after withdrawal from British Railways. The time worn loco initially had its BR numbering a logo painted over for a short while before being painted in to LSWR colours. The delightful Hornby model was used for this.

Below, some previous projects, follow the links for the proper stories...

Hazelbank - a Scottish Borderland beauty. Click to enlarge
Refurbishing layouts can be great fun - older scenery methods make a great base for contemporary materials. An awful lot of static grass was required for this 21 x 15 foot layout - along with over 60 bespoke trees. This job was spread over 4 busy days. More here http://nevardmedia.blogspot.co.uk/2018/01/scotland.html

Great Coles Wood Halt
A layout in a box! http://nevardmedia.blogspot.co.uk/2018/01/layout-in-box.html

Pottendorf
Pottendorf http://nevardmedia.blogspot.co.uk/2017/10/a-german-commission.html

Somewhere in Suffolk

$
0
0

A little fun in the studio, messing about with one of my photo planks, a grubbed up Hornby J15 and a recently built Airfix windmill. The background is a bit of computer jiggerypokery, because I didn’t have the time to build the entire scene. Recreating these mock ups, I find quite useful when planning layout ideas, if only to see what works, or not. Click on the photo above for a bigger version.

Later this year I plan build a small East Anglian themed layout when I have time between build commissions for other people. Knocking up all the buildings on weekends between my weekday commercial work is the way forward - the actual layout build can then be quite speedy.

Here is the original set up, just a couple of sheets on white foam board, simply lit with some natural window light. For budding photographers, I highly recommend knocking up a little length of grassy embankment with track. If you don’t want to mess about indoors with your camera, fun can outside with a real background.

Nano Layout?

$
0
0


Finally finished the tiniest layout I’ve ever built. Just 14x4 inches without fiddle yard. Designed to live in a small plastic storage box. Working in such a small scale and footprint definitely sharpens up my act, the camera getting a lot closer than the eye! This was a commission, the owner supplying the baseboard with a length of track pinned down - my job was to decorate it to make it look ‘West Country’. I’ll miss this one when it goes on Monday. Could such a small layout (if it can be called that) be a new sub genre #nanolayout ? Rule: 2 square feet? 

Mini Branch Line Terminus

$
0
0


Progress with my current commission. A OO Gauge (1/76) branch line terminus in a foot print of 4 x 1 feet. Exit left to fiddle yard.

I’m using traditional copper clad point construction here, one of the joys being that a track plan can be drawn to fit the space. Not a straight piece of track here for greater visual appeal.

Once the track is constructed, the foamcore base will be glued on to the plywood baseboard- a Tim Horn diorama case/baseboard. Laying track inside a diorama case would require the skills of a contortionist - this gets around that.


Peco Lineside LK 200 Wooden Station

$
0
0

For my current customer project based on a Colonel Stephens style branchline terminus in OO (1/76 scale), I'm using the Peco Lineside LK 200 Wooden Station building kit, which for the price between £10 and £15 depending on where you buy it from is a steal.

Peco produce 3 different versions of the kit, this is the 'wooden' version, which uses a laser cut MDF building shell and a plastic injection moulded roof plus other details. Peco also produce 'brick' and a 'stone' versions  - those are available as all plastic kits.


The build took 4 hours which included the painting time - a nice afternoon project sitting in the garden. The instructions recommend impact adhesive for gluing the MDF bits, but I find that super glue/cyanoacrylate adhesive better, if only because you don't get all the associated stringy threads of glue.

The kit is supplied with a base, which to be honest is pointless, all that will do is make it impossible to get inside the building, if like me you want to add the window glazing after painting. Some clever types might want to add lighting too.  Irritatingly, the discarded base clips in to the slots that can be seen around the base. I'll have to fill those in due course or hide them behind station furniture.


Despite the minor gripe regarding the pointless building base and ugly slots to locate it, this kit makes up in to a rather nice backwater railway building, and one that could suit many a scenario irrespective of railway company or region being depicted. To finish I chose a faded green and cream colour scheme, something that could pass for Southern Railway/SR or even LNER. Paints from times long gone soon faded, especially green which was seldom bright and lurid as depicted on many model railways, despite them supposedly being the 'correct colour'.


The little building sits on a platform, for this I built up 3 layers 6mm foamboard and topped it off with a mounting board top - all bonded together with PVA. Brick effect plastic card was added to the sides. The card top had edging stones scribed on with a scalpel. The platform initially looks too deep, but once the track is laid next to it, the height will be about right. In the UK platforms are a lot higher  than most other parts of the world, just use less layers of foam board!


Looking down on to the platform, picking out the edging stones in a lighter shade and adding a few repairs adds interest. I used interior matt emulsion paint - increasingly I find myself using such for card structures, they also have the advantage in that they have a little texture - especially if stippled as they dry.


Terminus in a Box

$
0
0


Some progress with a little Colonel Stephens style branch line terminus commission. Next to go in will be the backscene which is currently at the printers and some brighter than normal LED lighting which arrived a short while ago. I’ll then be able to perform the scenic work which will transform things dramatically. The little holes along the front now have inset tiny toggle switches for electric point operation. I’ll post more updates soon. Scale 1/76, this space is 4 x 1 feet.

Click on the photo for a bigger view

Thanks Allan

$
0
0

Click on the photo to enlarge

There are many ways to weather models, here’s a Dapol (Airfix) water tower/tank kit (a bargain that can be found for around 6 or 7 ££££) after a blast of a few primers. 

I usually start with the black and mist over the other shades. The yellow filler primer is fairly new to me, you can use it for lightly misting over Model trees along with the red for an early autumn look too. 

Here’s the result after 2 or 3 minutes. Further work can be performed with washes and dry brushing if desired. 

These paints are very toxic, so always work outside if you can and consider a breathing mask. Posh people will have a spray booth. 

I have to acknowledge the late Allan Downes for this aerosol paint tip. 

Sticky Backed Plastic

$
0
0

Model railway commission update: 

I picked up the photo printed backscene a short while ago (from AJ Signs in Guildford).

It is intentionally over sized to allow me to trim 3 or 4 cm off the base so it looks right from just above track level. It is simply inserted in to the diorama case temporarily for this photo.

Scenic work will hide the transition from 2D to 3D. The backscene is printed on to matt laminated sticky backed plastic, which in turn will be stuck in to card to allow for curved corners.

I hope to complete this little layout very shortly. More updates soon.

Click for a bigger view....

BBQ Skewers

$
0
0

Passing the loading gauge on Polbrook Gurney Colliery. I used code 55 rail here for that lightweight industrial look. Filing the point switch blades takes moments with such fine profile rail.

Note one of my ‘budget’ yard lamps. Bbq skewer, bent nail with a slice of plastic tube. 5 mins work. Bamboo blinds make an inexpensive source of fine bamboo otherwise, the lean-to was made from such. Scale OO 1/76. 

Click on the above photo for a bigger view.

85 Hours

$
0
0

My latest commission is almost complete after 85 hours. Yesterday was spent fabricating and adding details.... click on the image for a super sized view..

3 x 1 Plank

$
0
0

A personal quickie I worked on last week for me between commercial jobs, all on a 3x1 plank. The inspiration is the Wisbech and Upwell Tramway, a mostly unfenced railway that ran next to, or actually along the road in deepest Cambridgeshire through to the 1960’s. Give it a Google.

The wonderful town buildings were a lucky secondhand find, they just had to be used, they were very much the catalyst for this speedy project. The buildings are at least at least 30 years old and once lived on a much bigger layout which has since been broken up. Sadly I have no further information to hand. If you know of the layout or the builder, please comment in the comments section.

The windmill is an Airfix/Dapol kit knocked up in the spring, in reality such a structure would have fallen out of use a good century before the railway came. The rail served shed with door is a chopped up Bachmann colliery wash-house modified with pitch roof and doors. Its use is a mystery, maybe a paintshop for pumpkins or storage for pedant’s ruck sacks. The other shed, another ready to plonk thing that had been gathering dust.

Track is PECO, ballasted with sieved grit from our local common. The cheapo quickie cobbles were created using the empty shell of a ballpoint pen pressed in to Das clay. All in all around 18 hours work, this project being more an assembly of existing bits than a true build.

It will link in to other modules in due course to allow through running. At some stage it will live in an illuminated diorama case to fit it with my other layouts. Track has been aligned so it can connect to my other layout Brew Street. I’ve Brew Street booked in to the Rochdale Expo In April 2019, so will probaby add this module.

Click on photos above and below for a bigger view...


Combwich look-a-likey

$
0
0
I’m currently building a OO Gauge layout based on Combwich for a customer. It’s using a mix of secondhand buildings and kits. Size is around 9 x 7 feet scenic in a L shape. The build so far has taken around 4 months. I hope to deliver and install it in its new home in just a few weeks. We have decided to call the layout Combwich West.
Combwich West Station , as a train from Bridgwater arrives. 
The morning service has just departed Cannington Halt and is passing the timber yard Sidings. 
Combwich West Level crossing 

Trainset!

$
0
0
Porth Emmet Railway Station - click to enlarge.
Recently I was commissioned to build a traditional 5 x 4 foot trainset. I've wanted to build such for some time, so this build was going to be even more fun than usual. I have a feeling that even the most serious diehards of the hobby secretly crave a traditional trainset, though they might not mention it to their peers. It will be interesting to see whether they still follow this blog after this post.
5 x 4 feet of roundy-roundy trainset fun. Operation is surprisingly fun, with much of the charm being to simply let a train run round and round and round and round and round and round.... Click to enlarge.
Design wise, seeing what could be shoe horned on to a dining room sized board without cramping things was going to be fun. With the sharp set track curves, I could have packed a lot more track in, but then I fear realism would have been compromised.

Part of the brief in addition to set track, was to use as many pre-made items as possible, partially to keep the cost down (because I wouldn't need to charge for scratch building), but also to achieve a speedy build to demonstrate that model railways don't have to take years. However, whilst all the tricks of the trade were embraced for rapid result, I wanted the scenic treatment to be at the same level as my more serious model railway builds.

The layout took just 11 working days, spread over a two week period. This layout will be on permanent public display at Kernow Model Centre's new Guildford store from May 2019.

Day 2 in to the build, two 5 x 2 foot boards allow the layout to be split down the middle for ease of transit. 5 x 4 feet is quite a big area to cart about as one piece. The laser cut baseboards were supplied by www.timhorn.co.uk





Hotchpotch Rd & Little Smoke Junction

$
0
0
Back in the summer I built this little customer layout to fit in 3 of those popular plastic storage crates that are a little under 3 feet long and around 10 inches wide and deep.

I was supplied with detailed plans of what should go where by my customer stipulating buildings and track required. Due to his excellent planning it all worked a treat, as well as being great fun to build. I tip my hat to you sir if you read this post.

The build time of this fun little layout was 87 hours spread over a month or so.
A run around loop allows for a short train and small tender loco, the loco here being a Hornby J15. Much use was made of ready made items, this can be a more affordable option than scratch or kit-building for those on a limited budget.
Photo copyright Chris Nevard.

Looking through to the terminus - Hotchpotch Road.
Photo copyright Chris Nevard.

Both scenic boards - the scene here is around 5 feet long split over two boards.
Photo copyright Chris Nevard.

'The Smoke Junction' - the recent run of exciting ready to run smaller locomotives being ideal for a layout like this.
Photo copyright Chris Nevard. 

'Hotchpotch Road' - the buildings are from PECO and Ratio kits, the track is PECO set track. The wonderful laser cut sign on the signal box is from www.scalemodelscenery.co.uk
Photo copyright Chris Nevard. 
The layout can be stored in 3 boxes, the left hand box being used for the fiddle yard and storage.
Photo copyright Chris Nevard.
Polite Notice!
All photography copyright Chris Nevard. Unauthorized use may incur legal action. Apologies for posting this, but frequently I find my photography on third party and often commercial pages without prior consent. If you need to use an image, drop me a line - I don't bite, unless of course you don't ask.

Sunday Ukulele Strummalong - Putting on the Style

$
0
0


Sunday Strummalong in the spring garden avoiding flying drones - Putting on the Style by the great Lonnie Donegan


Neath Riverside - A Slice of 1960s South Wales

$
0
0
Scale OO / 1:76
Click on images for a bigger view..

I've been working on this layout commission for much of the year alongside other projects. It’s a new build supported with some wonderful secondhand buildings salvaged from a layout by ace model maker Iain Robertson. The station area seen here is housed in a 6ft x 18 inch diorama case. It is the first of several scenes that link together.

The railway room that this destined to live in has grown significantly since taking on the commission, so a colliery and further rural scene are under currently construction. These will extend the layout by around 300%.... more to follow..
A watery scene - the tide is out, so probably a smelly location. No supermarket trolleys, they're more a feature of modern times!

A Western Region Stanier 2-8-0 trundles through Neath Riverside past a few coal bins. The trackplan is based on an Iain Rice design from the 1980s.
Looking towards the twin tunnel portals - this is in fact a junction - the Class 22 coming off a military line with a van train.

Shunting the river side yard. Extensive use has been made of the recent Peco Bullhead range, which creates that hand-built look with ease.

July 2020 Model Rail magazine features the first of a 2 part series on Neath Riverside explaining the construction in greater detail https://www.greatmagazines.co.uk/model-rail-july-2020

Viewing all 825 articles
Browse latest View live